Toll Free (800) 824-2676 | Phone Hours (PST)
MON-FRI 8am-5pm

INSTALLATION & CARE INSTRUCTIONS

Installation

- Before mounting tires to the wheels, check brake, hub, fender and suspension clearance.

- Mounted wheels cannot be returned.

- Mount tires onto wheels only with equipment specifically designed for alloy wheels.

- Do not use equipment that will scratch, scrape or abrade the wheels. This will void the warranty.

- Wheel adaptors and spacers are not recommended. If installed, the purchaser assumes all responsibility and liability.

- Use only self adhesive tape weights when balancing. The use of clip on style weights is not recommended as they can damage the wheel finish and void the warranty.

- Always use the correct type of lug nut.

- Always use the vehicle manufacturer's recommended torque specifications when tightening lug nuts.

- Re-torque the lug nuts after 75-100 miles of driving.

Tire Pressure Monitoring Sensors (TPMS) – If you vehicle is equipped with a TPMS system you must (re)install the sensors into the wheels. Some TPM sensors require activation after installation. Refer to your owner’s manual for specifics.

Care & Maintenance

- Keeping your wheels clean on a continual (weekly) basis is the best way to maintain their "like new" finish and luster.

- Never clean your wheels while they are hot.

- Water and a mild non-abrasive cleaner is the best solution for cleaning your wheels.

- A good rule of thumb to follow when selecting a cleaning solution is: if it is not safe for the paint on your vehicle it is probably not safe for your wheels.

- Applying a coat of non-abrasive carnauba based auto wax after cleaning is all the protection your wheels should need.
These installation and care instructions must be given to the retail purchaser.

Questions? Contact:

Factory Reproductions Inc.
13353 Benson Avenue
Chino CA 91710
Phone: (909) 590-5252
Fax: (909)590-5445